Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700 degrees C - ONERA - Office national d'études et de recherches aérospatiales Accéder directement au contenu
Article Dans Une Revue Materials Science and Engineering: A Année : 2013

Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700 degrees C

Résumé

Several microstructural parameters of the NR6 nickel-based superalloy were varied by applying four heat treatment procedures. Tensile creep tests were performed in air at 700 degrees C and 700 MPa on specimens exhibiting different grain sizes, strengthening gamma' precipitate sizes and distributions and grain boundary morphologies. Flat creep specimens were instrumented thanks to a dedicated microextensometry technique to analyze the local intra- and intergranular deformations after tensile creep under vacuum at 700 degrees C. Tertiary gamma' precipitate dissolution, grain boundary serration and larger grain size reduce grain boundary sliding contribution to overall strain. These effects are attributed to the promotion of Orowan by-passing instead of shearing of the gamma' strengthening particles by matrix dislocations, increase of grain boundary resistance or decrease of grain boundary fraction. Relationships between local deformations and macroscopic creep behavior have been evidenced. (C) 2013 Elsevier B.V. All rights reserved.

Domaines

Matériaux

Dates et versions

hal-00934984 , version 1 (22-01-2014)

Identifiants

Citer

K. Thibault, D. Locq, P. Caron, D. Boivin, Y. Renollet, et al.. Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700 degrees C. Materials Science and Engineering: A, 2013, 588, pp.14-21. ⟨10.1016/j.msea.2013.09.015⟩. ⟨hal-00934984⟩
55 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More